Jurupa Community Services District provides water and wastewater service in Eastvale and runs a backflow prevention program that requires assemblies on properties with an auxiliary water supply, multiple-use capabilities or more than one service connection. The City's Building Safety team issues plumbing permits. Call the number on this page to be connected with a local plumber in Eastvale.
Eastvale's commercial setup
Eastvale grew from dairy and farm land into a commuter city from the late 1990s on, and its building stock is young: the median home dates to 2007. Commercial centers near I-15 and Hellman Avenue share JCSD for water and sewer. JCSD blends local groundwater with imported surface water, disinfects with chlorine and reports total hardness averaging 162 mg/L, with a range of 25 to 220. Its Cross-Connection Control and Backflow Prevention Program, set by Ordinance No. 468, posts an Annual Backflow Assembly Test Form and lists of certified testers; Technical Services is at 951-685-7434 ext. 197. Many of the first water heaters and commercial fixtures installed during the build-out are now old enough to need attention.
What to do when something goes wrong
- Shut off water to the affected area, or the whole building if the leak is large.
- For a sewer backup, stop using fixtures on that line and keep staff and customers clear.
- If there's a gas odor, get everyone out first, then call 911 and SoCalGas at 1-800-427-2200 from outside.
- If the problem is a JCSD main or meter after business hours, call JCSD's main line, 951-685-7434.
- Tell the landlord or property manager if you lease.
- Find the most recent backflow test form if an assembly is involved.
Symptoms and likely causes
| Symptom | Likely cause |
|---|---|
| Water heater running out early | Aging original equipment or sediment buildup |
| Scale on aerators and dish equipment | Hard water at the upper end of JCSD's range |
| Food-service drains slowing | Grease buildup or an interceptor that needs pumping |
| Failed assembly test | Worn check valve, relief valve or seals |
| Wet patch near the meter | Leak on the service line or at a fitting |
Cost factors
Price depends on the assembly or equipment size, how much locating is needed, access in a finished suite, after-hours timing and permits. The City requires permits to install, alter, repair or replace any plumbing or gas system, and water heater permits are generally issued over the counter when there are no special design requirements. Building Safety is at (951) 703-4450, with City Hall open 7:30 a.m. to 5:30 p.m. Monday through Thursday and online submissions accepted any time.
Commercial Plumbing questions in Eastvale
Does every commercial property need a backflow assembly?
Where do we get a plumbing permit for work on a commercial building?
Do apartment complexes and HOA buildings count as commercial plumbing?
Does our water provider have lead service lines?
More plumbing services in Eastvale
Commercial Plumbing nearby
Helpful guides
Sources
Last updated: